SUPER RISER CLAMP For 1″ & 1¼” Handlebar Center Sections
The Bagger Nation Super Riser Clamp is a MUST when installing internally wired custom handlebars. Our incredibly strong design is CNC machined from a solid block of 6061-T6 aircraft aluminum. This innovative design incorporates a series of three locking screws that virtually lock the ever-popular tall Monkey Bars in place. (Or any tall handlebar for that matter!)
MORE DETAILS BELOW!
SUPER RISER CLAMP
For 1″ OR 1¼” Handlebar Center Sections
The Bagger Nation NO SLIP Super Riser Clamp all but eliminates the potential for handlebar slippage that is common with tall bars and big riders. Simply put, a 10” or higher bar and a 200+ lb. rider creates increased leverage that was never considered by factory engineers! Especially when you’re suddenly pulling yourself up off your seat in an “emergency unseen pothole, trying not to bust your butt” situation…riders know exactly what we mean!
Additionally, 2007-Earlier HD Touring models have a 2-piece top clamp system that can create a safety problem when handlebars are used with internal wiring. A large wiring exit hole is required on handlebars designed for internal wiring. This design factor can create a stress riser or breakage point where the handlebar is weakest at a point where the leverage is greatest at the same time. Without the use of our Super Riser Clamp, you have created a recipe for potential disaster! The one-piece, 6061 T-6 aluminum CNC machined clamp completely eliminates this stress area and makes the wire exit of the handlebar the strongest, not the weakest point!
Last but not least, The Bagger Nation Super Riser Clamp and its 1-piece design with bar-locking set screws machined into the clamp will prevent inferior handlebars with poor knurling from slipping. Our Super Clamp has a wire relief incorporated into its design specifically for internal wiring applications. This design displaces pressure off of the center of the handlebar, making the handlebar stronger and more secure. This becomes especially important when using 1” handlebar styles and internal wiring*.
• A must for all internally wired handlebars
• Prevents even the tallest bars from slipping
• Available in two sizes 1” & 1¼”
• Incredibly strong. machined from 6061-T6 aluminum
• Satin finish is standard, but a 1” Chrome is available.
• 3 set screws lock your bar in place
• Easy bolt-on installation
• Made in the U.S.A
NOTE: *Bagger Nation STRONGLY recommends installing our 1-piece Super Riser Clamp-on 2007-Earlier HD Touring models. Failure to use a one-piece clamp when installing Monkey Bars will VOID the Bagger Nation warranty.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit: www.P65Warnings.ca.gov
|Dimensions||11 × 7 × 5 in|
1.25" Handlebar Center Section, 1.00" Handlebar Center Section, 1.00" Handlebar Center Section (CHROME)
You may also like…
POLYURETHANE HANDLEBAR RISER BUSHINGS 1984 – PRESENT TOURING$13.95 View ProductAdd to cart
WELD WING SUPER RISER CLAMP$179.95 View ProductSelect options
Handlebar Riser Kit$59.99 View ProductSelect options
RACING HAND LEVERS For Touring 1996-2020$149.95 View ProductSelect options
OEM MONKEY BARS 1¼” Diameter, 1¼” Clamp area (2015 – Present Road Glides & Road Glide 3)View ProductSelect options
PRE-WIRED OEM MONKEY BARS 1¼” Diameter, 1¼” Clamp area (2015-Present Road Glide, Freewheeler & Road Glide 3)View ProductSelect options
MONKEY BAGGER BARS 1¼” Diameter, 1” Clamp area (Batwing Fairing)View ProductSelect options
🗦PRE-WIRED🗧MONKEY BAGGER BARS 1¼” Diameter, 1” Clamp area (2014-Present Batwing Fairing)View ProductSelect options